![background image](http://html.mh-extra.com/html/icg/360/360_user-manual_610616073.webp)
Mounting Originals on the External Drum
4. Place the original on the drum cradle table
with the side to be in contact with the drum
downwards and the top of the picture
towards the drum boss.
5. Attach two pieces of drum mounting tape
to the original, one along the edge of the
original nearest to the drum and the other
along the opposite edge.
The tape should run along the full length of each
edge.
6. Take the original away from the drum cradle
and lightly spray or apply a very light
dusting of powder to the side of the original
which will be in contact with the drum.
If you are using powder, puff a light cloud of
powder in the air, allow it to disperse momentar-
ily, then wave the original through the cloud.
7. Place the original on the drum cradle table
once again, with same orientation as in
step 4.
8. Using the grid on the table to ensure that
the original is square, attach the leading
edge of the original to the drum:
3250360-2
53
Summary of Contents for 360
