![background image](http://html.mh-extra.com/html/icg/360/360_user-manual_610616041.webp)
Electrical Connections
If not, contact your supplier immediately
and DO NOT ATTEMPT TO CONNECT THE
SCANNER.
3. Ensure that the scanner Power On/Off
switch is in the off position.
The switch is off with the side marked with a ‘0’
pressed down.
4. If possible, switch off the mains outlet
socket to which the scanner is to be
connected.
5. Connect the supplied mains cable to the
mains power connector on the scanner.
6. Connect the other end of the scanner mains
cable to the mains outlet socket.
Note: The precautions in steps 3 to 6 above
ensure that the scanner is adequately
earthed before you make the SCSI signal
connection.
7. Connect the SCSI signal cable to the SCSI
connector on the scanner.
8. Uncoil the serial connection cable from its
stowage position at the rear of the scanner.
One end of the cable is already connected to the
scanner.
9. Clip the lower grille into position on the
scanner, leading all cables out from below
the grille.
3250360-2
21
Summary of Contents for 360
