The ADF-650/651 allows automatic scanning of up to 50 sheets of original scan
material from A6 size (4.14" x 5.83") up to legal size (8.5" x 14"). Sheets to be scanned
are fed from the feeder's top tray, guided and scanned as they pass the scanner's
image sensor, and then exit into the feeder's bottom tray.
The ADF-650/651 mounts onto the scanner in place of the scanner's document cover
or Transparent Media Adapter (TMA).
Checking the Package
The ADF-650/651 is packaged as an assembled unit, ready to be mounted on the
scanner. After unpacking the ADF-650/651, make sure that the following items are
included:
•
ADF-650/651 unit
•
Warranty Card
•
ADF-650/651 Installing and Getting Started document
Introduction
The ADF-650/651 is an optional sheet feeder accessory for the Microtek ScanMaker-
series of flatbed scanners. The ADF-650 is designed for the ScanMaker 5600,
ScanMaker 6700, and ScanMaker 6800, while the ADF-651 is designed for the
ScanMaker 5800 and ScanMaker 5900.
Copyright©2002 Microtek International, Inc. http://www.microtek.com
I49-003468 A, November 2002
Microtek ADF-650/651
Installing and Getting Started
This document describes the features of
the Automatic Document Feeder (ADF-650/
651) and provides information on how to
install the ADF-650/651.
Trademarks
Microtek
®
, ScanMaker
TM
, and
ScanWizard
TM
are
trademarks or registered
trademarks of Microtek
International, Inc.
Macintosh
®
and Apple
®
are
registered trademarks of
Apple Computer, Inc.
Windows
®
is a registered
trademark of Microsoft
Corporation. All other
products or name brands are
trademarks of their
respective holders.
Important
Documents you scan may be
protected under copyright
law. The unauthorized use of
such documents could be a
violation of the rights of the
copyright holder. Microtek
bears no responsibility for
the unauthorized use of
copyrighted materials.
ADF-650
ADF-651
