IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, User Manual

Page: 148 / 248

Note: You can open the Storage resources dialog at any time by clicking the View
resources button on the toolbar.
Repository configuration
The Repository configuration pane features the following information:
Table 35. Repository information
Field Description
Configured size (in TB) The physical repository size, in terabytes, that was specified
when the repository was created.
Configured factoring ratio The estimated HyperFactor factoring ratio that was
specified when the repository was created.
Configured peak throughput
(in MB/Sec) The expected maximum peak throughput that was specified
when the repository was created.
Configured license capacity The physical capacity of the repository, in terabytes, that is
specified by the user license. (The unit is shown in TB as a
decimal format, which means it is a multiple of 1000,
instead of a multiple of 1024.)
Total utilization
The Total utilization pane displays the following information in both graphical
and numeric format:
Table 36. Total utilization information
Column name Definition
Used space The amount of disk space currently containing physical
data.
Nominal data size The amount of nominal data used for backup and
replication.
Deduplication ratio The ratio of the nominal data size/used space.
Storage saving The percentage of the data saved derived from the
deduplication ratio.
Storage savings = (1-1/deduplication ratio) x 100.
Replication information
The Replication information pane displays the replication properties of the
ProtecTIERsystem:
v ProtecTIER Replication Manager information:
Field Definition
Management address The external IP address of the ProtecTIER
Replication Manager used by ProtecTIER
Manager to connect to the Replication
Manager.
Replication address The replication IP address of the
ProtecTIER Replication Manager.
v Grid information:
128
IBM TS7650G Deduplication Gateway for ProtecTIER
®
: User's Guide for FSI Systems