IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, User Manual, Page: 109 / 248

2. From the Welcome page of the Authentication setup wizard, click the
Workgroup
authentication type. The Leave Domain window is displayed.
3.
Select the Leave active directory domain option.
4. Enter the Accounts operator user name and Password.
5. Click Next. The Properties window is displayed.
6. Use the Properties window to assign a descriptive name for the workgroup.
Type a name in the Workgroup name: field and click Next. The Preview
window displays the Authentication type and Workgroup name.
7. Click Finish to save and exit the Authentication setup wizard. A message
displays that the workgroup was configured successfully.
8. From the Set authentication mode dialog, click Yes to assign users via the
User’s Management
wizard.
9. From the User’s Management wizard, activate the users or add new users.
For more detailed information, go to “User's management for CIFS
workgroups” on page 80.
10. When you have completed activating or adding users, select share by share
and follow the “Modifying user access to the share” on page 88 procedure.
Results
The authentication type migration is now complete. Continue working with
ProtecTIER for FSI.
Chapter 11. About CIFS
89