IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, User Manual

Page: 129 / 248

3. Right-click on the policy and select Modify replication policy from the popup
menu, or select Replication > Replication Policy > Modify replication policy.
The Modify policy wizard is displayed.
4.
To change the name of the policy, type the new name in the Policy name:
field, otherwise, leave the policy name as is and click Next. The Source
directories
window is displayed.
From the Source directories window, you can activate or deactivate the
source, add a new source, or remove an existing source.
5. To stop replicating a specific directory, or set of source directories, in a
replication policy, you can:
a. Clear the Enabled check box of the source directory.
Note: A warning message displays that once a source directory is disabled
and saved, it cannot be reactivated. To replicate again, the source must be
removed and added back again.
b. Remove the source directory in its entirety from the policy configuration.
This results in deletion of the directory and all its data on the replication
destination directory (or directories).
Note:
Removing the source directory affects only the policy configuration
and does not delete the path itself.
To remove the source directory, select the file system and path from the
Source directories
list and click Remove. A red X appears in the Delete
column.
6. To add additional directories, click Add. The Add source directory window is
displayed.
ts761382
Figure 19. Modify policy source directories
Chapter 13. Native replication management (for FSI)
109