IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, User Manual

Page: 98 / 248

2. Select the authentication type and click Next to advance the wizard according
to the chosen authentication:
v Workgroup
Go to “Defining a Workgroup.”
v Active directory
Go to “Defining the Active directory” on page 79.
Defining a Workgroup
About this task
Continue using the Authentication setup wizard to set the parameters for
Workgroup authentication.
Procedure
1. From the Welcome page of the Authentication setup wizard, select the
Workgroup
authentication type and click Next. The Properties window is
displayed.
2. Use the Properties window to assign a descriptive name for the workgroup.
Type a name in the Workgroup name: field and click Next. The Preview
window displays the Authentication type and Workgroup name.
3. Click Finish to save and exit the Authentication setup wizard.
4. After a workgroup is successfully configured, a popup window prompts the
user to assign users via the Users Management wizard. Click Yes and go on to
“User's management for CIFS workgroups” on page 80.
What to do next
Go on to “User's management for CIFS workgroups” on page 80.
ts761
120
Figure 11. Authentication setup wizard
78
IBM TS7650G Deduplication Gateway for ProtecTIER
®
: User's Guide for FSI Systems