manualshive.com logo in svg

IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, User Manual

Share
Download
IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY User Manual Download Page 214

Warning: You should not configure Replication Manager on more than one
server in a grid, as doing so may cause conflicts within the grid. It is
recommended that you designate the Target server (Hub) as the
Replication Manager.

6.

When  the 

Are you sure you want to configure the ProtecTIER Replication

Manager on this node? (yes|no)

prompt  displays,  type: 

yes <Enter>

.

The system displays the following message:

Gathering information [ Done ]

The 

"activatePTReplicationManager ended successfully"

message  displays.

7.

When  the 

Press the ENTER key to continue...

prompt  displays,  press

<Enter>

.  You  are  returned  to  the 

Configure replication (...)

menu.

8.

Type 

E

and press 

<Enter>

to exit.

9.

After configuring ProtecTIER Replication Manager, you must restore the
replication grid using the Restore grid procedure. Go on to “Restoring the
ProtecTIER Replication Manager.”

Restoring the ProtecTIER Replication Manager

The following tasks describe the different methods for restoring the processed grid
using the Restore grid procedure.

The ProtecTIER Replication Manager server automatically handles grid analysis.
Grid analysis validates and checks the integrity of the grid in relation to its grid
members. To begin restoring a grid, import a grid for analysis by selecting one of
the tabs appearing on the Restore grid window:

v

File (see “The File tab”)

v

IP Address (see “The IP Address tab” on page 195)

The File tab

The following task describes how to restore the Replication Manager from the File
tab.

About this task

If you are restoring a grid from a backup 

.zip

file, follow the steps below to

import a grid for analysis and restore:

Procedure

1.

Select the Restore grid option from the Replication Manager menu. The
Restore grid

dialog is displayed.

2.

Select the File tab.

3.

Browse to the backup filename from which you want to analyze and restore the
grid, or enter a filename in the Backup .ZIP file name field.

4.

Click Read file.

5.

Select a grid to analyze from the dropdown list. The grid analysis is displayed.

6.

Click Restore. The current grid is restored and removed from the grid analysis
list.

7.

Select the next grid for analysis from the dropdown list. Continue restoring,
grid by grid, until the entire Replication Manager is restored.

194

IBM TS7650G Deduplication Gateway for ProtecTIER

®

: User's Guide for FSI Systems

Summary of Contents for TS7650G PROTECTIER DEDUPLICATION GATEWAY

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands