IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY User Manual Download Page 104

Page: 104 / 248

Click Next. Enter the user that should have access to the shared path in
theAdd allowed user field.

Assign the user permissions by selecting Write-enabled or Read only from the
Permissions

dropdown list.

Click Next. The Summary report displays the details of the CIFS share and
the allowed hosts and user permissions.

10.

Click Finish.

What to do next

Creating a CIFS share is now complete. Go on to “Configuring static routes” on
page 14.

To modify the properties of a CIFS share, go on to “Modifying a CIFS share on
ProtecTIER”

Modifying a CIFS share on ProtecTIER

About this task

This topic describes how to modify a CIFS share.

Procedure

Follow these steps to modify the properties, access and permissions of a CIFS
share:

From the Systems Management view, select an existing file system under the
File System category in the navigation pane.

ts761545

Figure 13. Create a CIFS share Users window

IBM TS7650G Deduplication Gateway for ProtecTIER

: User's Guide for FSI Systems

Summary of Contents for TS7650G PROTECTIER DEDUPLICATION GATEWAY
























































































































































































































































Search results

Summary of Contents for TS7650G PROTECTIER DEDUPLICATION GATEWAY

Reviews:

IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, User Manual, Page: 104 / 248

Search results

Summary of Contents for TS7650G PROTECTIER DEDUPLICATION GATEWAY

Reviews: