IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY, User Manual

Page: 139 / 248

4. Select the Limit network bandwidth checkbox to redefine the bandwidth speed
(in Mbit/Sec). The bandwidth limit value can range from 1 to 1000. Other
values will not be accepted. If the checkbox is not selected, the value will
default to an unlimited bandwidth speed.
5. Click Ok. The defined limit is displayed in the Limit (Mbit) field of the
Replication network
display of the device.
Results
Note: If the bandwidth limitation is changed during replication, the change does
not take effect immediately. If replication begins after the bandwidth limitation
change, the effect is immediate.
What to do next
Go on to .
Restoring backup data from a policy replication directory
This topic describes how to recover and restore data from a replication destination
directory.
If a situation arises that causes the source repository to be unavailable, replicated
data can be recovered from the replication destination directory.
While replication destination directories are created with "read-only" user
permissions on a shared path, they can be modified to be read/write accessible.
Once a replication destination directory is modified to be read/write accessible, a
ts760869
Figure 21. Limit network interface bandwidth window
Chapter 13. Native replication management (for FSI)
119