If the system-board tray stops during testing and you cannot continue, restart the
system-board tray and try running the diagnostic programs again. If the problem
remains, replace the component that was being tested when the system-board tray
stopped.
Diagnostic text messages
Diagnostic text messages are displayed while the tests are running. A diagnostic
text message contains one of the following results:
Passed:
The test was completed without any errors.
Failed:
The test detected an error.
Aborted:
The test could not proceed because of the server configuration.
Viewing the test log
You can use one of the following methods to access the test log when the tests are
completed:
v
From the DSA command line, issue the DSA CLI
view
command or select
Diagnostic Event Log
from the DSA graphical user interface (GUI).
v
From the DSA interactive menu, select
getextendedresults
.
v
From the DSA interactive menu, select
view
to view all of the collected results
and error log data.
v
In the DSA GUI, select
DSA Error Log
from the System Information page.
You can send the DSA error log file to IBM service and support to aid in diagnosing
the server problems or you can use the DSA CLI
copy
command to copy the log to
an external USB device.
Chapter 2. Diagnostics
33