Installing the system-board tray
To install a system-board tray, complete the following steps.
Note:
You might have to remove component fillers or covers before you can install
some components.
1.
Reinstall the microprocessors and heat sinks (see “Installing a microprocessor
2.
Reinstall the DIMMs (see “Installing a memory module” on page 107).
3.
Reinstall the battery (see “Installing the battery” on page 86).
4.
Reinstall the riser card (see “Installing a PCIe riser-card assembly in the
system-board tray” on page 116).
5.
Reinstall the PCIe adapters, if you removed any (see “Installing an adapter in
the system-board tray” on page 101).
Chapter 4. Removing and replacing server components
153
