IBM System Storage TS7600 ProtecTIER Series, Software Upgrade Manual

Page: 94 / 132

f. Click the tab for Logical/Physical . Controller A and B are displayed.
g.
Right-click Controller A in the Storage Subsystem window.
h. Select Properties . Verify and record the levels displayed for the DS4700
Firmware and NVSRAM:
v
Firmware Version at the minimum level of 07.50.13.00 or the
recommended level of 7.60.28.00
v NVSRAM Version at the minimum level of N1814D47R1050V07 or the
recommended level of N1814D47R1060V04
i. Close the Properties window. From the title bar, select Advanced
→
Maintenance
→
Download
→
ESM Configuration Settings . Verify that Card
A and Card B firmware are at the minimum level of 98C5 or the
recommended level of
98D0 .
j.
Click Close to close the window.
k. If the storage firmware level is lower than 7.50.13.00 (for example: 7.15.10.6
or 7.36.17.0), you must update it to minimum supported levels with
ProtecTIER v. 2.4 microcode. Go to step 2 to copy the latest storage
firmware from the
IBM System Storage ProtecTIER Manager V3.1 DVD to the
TSSC. If the storage firmware levels are 7.50.13.00 or higher (recommended
level is 7.60.28.00), proceed to the ProtecTIER v. 2.4 upgrade.
2. Insert the IBM System Storage ProtecTIER Manager V3.1 DVD into the TSSC
drive.
a.
If you are not already logged in to the TSSC, log in with user ID
service
and password
service
.
b. Right-click the blue desktop of the TSSC, and from the System Console
menu, select System Console Actions
→
CD copy to console .
c.
On the CD copy to console screen, select option 3, /home/service/offload .
d. Follow the instructions on the screen to copy the code.
e. After the code has been copied, the disk ejects.
f. Verify the
/home/service/offload/DS4k Storage Manager v10.60.x5.17 for
Windows 32-bit/DS4700 directory contents:
v
esm98D0.esm
v FW_DS4700_07602800.dlp
v
IBM_EXP810_CFG_v0150.DL
v
N1814D47R1060V04.dlp
v
ST3450856FC_B989.LOD
Right click the blue desktop of the TSSC. From the System Console menu,
select Terminal .
cd /home/service/offload/DS4k Storage Manager v10.60.x5.17 for Windows 32-bit/DS4700
ls
Note: The storage system firmware is located on the IBM System Storage
ProtecTIER Manager V3.1 DVD under a 10.60.x5.17 for Windows 32-bit
directory. It is used on the TSSC Linux version as well, and the files are the
same.
3.
Upgrade the DS Storage Manager application to version 10.60.x5.16 on the
TSSC.
a. Right-click the blue desktop of the TSSC and select Browser Functions
→
DS4000
→
Install GUI .
80
IBM System Storage TS7600 with ProtecTIER: Software Upgrade Guide