IBM System Storage TS7600 ProtecTIER Series, Software Upgrade Manual

Page: 54 / 132

Type the secondary timeserver's IP address.
For example: 192.168.12.15
<Enter>
The following is displayed:
Date, Time, Timezone & Timeserver(s) configuration
==================================================
1. Set date & time
2. Set Timezone
3. Set Timeserver(s)
c. Commit changes and exit *
q. Exit without committing changes
Please Choose:
12. Confirm and save your changes to the configuration by typing
c <Enter>
in
the
Please Choose:
field. A list of the configuration changes is displayed for
review.
Reviewing the results
Note: If only the date was modified, and not the timezones and/or timeservers,
only the date will be displayed in the contents.
For example: if you modified the date, added a primary and secondary time
server, and specified
America/Chicago as the time zone, when you choose c to
commit the changes and exit, the file contents appear as follows:
Please review the following information:
========================================
Date: Mon Nov
9 14:51:34 2009
Primary time server: 192.168.10.11
Secondary time server: 192.168.15.11
Timezone: America/Chicago
Do you wish to apply those settings? (yes|no)
Type
y
to save and apply the changes.
Note: the cluster & VTFD services on all nodes must be stopped in order to
continue. Do you wish to continue? (yes|no)
Type
y
to stop and restart the cluster and VTFD services on all the nodes.
Stopping Cluster Services [ Done ]
Stopping NTPD [ Done ]
Setting Time Zone [ Done ]
Setting Timeserver [ Done ]
Setting Date & Time [ Done ]
Starting NTPD [ Done ]
Starting cluster [ Done ]
Cluster Started
Using the ProtecTIER Configuration Menu
About this task
Customer Task
The following procedures apply only to TS7650 Appliance systems.
40
IBM System Storage TS7600 with ProtecTIER: Software Upgrade Guide