IBM System Storage TS7600 ProtecTIER Series, Software Upgrade Manual

Page: 34 / 132

The following example shows the type of output that is displayed.
# Interface L/B Method IP Address Netmask Devices
1 virt1 RR 10.10.1.1 255.255.255.192 eth5
2 virt2 RR 192.168.151.2 255.255.255.0 eth9
3 virt3 RR 192.168.152.2 255.255.255.0 eth6
4 virt4 RR 192.168.153.2 255.255.255.0
5 virt5 RR 192.168.154.2 255.255.255.0
6 virt6 RR 10.10.1.98 255.255.255.192 eth7
Available Options:
==================
(e)edit a virtual interface
(r)re-assign a physical interface
(c)commit changes
(q)quit
Please Choose (e,r,c,q): r
Available Devices:
eth5 eth9 eth7 eth6
Device to re-assign:
(for example: eth5)
Available Virtual Devices:
virt3 virt6 virt5 virt4 virt1 virt2
Virtual to assign into:
(for example: virt3)
9. When you want to commit the changes, type c <enter> .
10. Type
q <enter>
to quit.
11.
The system returns you to the command prompt.
What to do next
The procedure is now complete. Continue to “Verifying the server time, date, and
timezone settings.”
Verifying the server time, date, and timezone settings
Use this procedure to verify the server time, date, and timezone settings.
Procedure
Perform the following steps to verify the current time, date, and time zone settings:
1.
Enter the command:
date <enter>
The server time, date, and time zone settings, display. The following example
shows the type of output that is displayed.
Wed Apr 14 14:19:50 EDT 2010
2. Confirm that the settings reflect the preferences that were provided by the
customer. If changes are necessary, refer to Appendix A, “Changing the system
date and time,” on page 37 for instructions, update the settings, and then
return to this page.
3. Repeat the above procedure for all additional servers that you upgraded to
ProtecTIER v3.1.x.x.
20
IBM System Storage TS7600 with ProtecTIER: Software Upgrade Guide