IBM System Storage TS7600 ProtecTIER Series, Software Upgrade Manual

Page: 106 / 132

You are now logged into the server IMM.
16.
In the
ASM
section of the of the left navigation pane of the Integrated
Management Welcome window, click Network Interface .
17. In the Static IP Address field, change the last octet to a value that is less than
the default of 254. For example: 172.31.1.253.
18. In the Netmask field, type: 255.255.255.0.
19. Leave the Gateway field blank.
20. Click Save. An Alert dialog prompting you to click IMM Restart is displayed.
21. Click Restart . Click OK to continue. The IMM IP address on server B is now
unique.
22. On the TSSC or service laptop, open a browser window.
23.
In the address bar of the browser, type the unique IMM IP address that you
set in step 17.
24. In the Login window, enter
USERID
as the username and
PASSW0RD
(with a
zero) as the password. Click OK .
Note: The username and password are case sensitive and must be entered in
uppercase.
The Integrated Management Welcome window is displayed (Figure 14).
25. Use the Inactive session timeout value menu to specify an amount of time
that will keep your session active until you can complete your task.. (Ten
minutes should suffice.)
26.
Click
Continue
.
What to do next
Go to “Enabling remote control” on page 93. (This might not be necessary for the
IMM.)
ts760487
Figure 14. Integrated Management Module Welcome window
92
IBM System Storage TS7600 with ProtecTIER: Software Upgrade Guide