IBM System Storage TS7600 ProtecTIER Series, Software Upgrade Manual

Page: 118 / 132

Customizing the color palette
About this task
Use this procedure to customize the color palette for ProtecTIER Manager to
improve visibility in the display, or to suit your personal preferences.
Procedure
1. If necessary, start ProtecTIER Manager as described in step 1 on page 101.
2. Open the Preferences dialog box, as described in 2 on page 102.
3.
Scroll down (if necessary) to see the entire
Color selection
list, and then select
the color you want to change.
The
Color selection dialog box opens, with the Swatches tab selected, as
shown in Figure 21:
The color that is currently defined for your selection is shown in the Preview
pane.
4. Select a new color from the color palette.
i
You can also specify a new color by using the Hue/Saturation/Brightness
(HSB) or Red/Green/Blue (RGB) color models. To do so, click the tab for the
model you want to use and enter the required values.
5.
When you have finished selecting or specifying the new color, click
Ok
.
You are returned to the Appearance tab.
6.
To change another color, repeat steps 3 through 5.
ts760881
Figure 21. Color selection, Swatches tab
104
IBM System Storage TS7600 with ProtecTIER: Software Upgrade Guide