IBM SAN256B-6, Installation, Service And User Manual

Page: 249 / 292

Relocating the rack
> (> ) 500 lbs. 227 kg.
a69i0333
DANGER
Heavy Equipment - Personal injury or equipment damage may result if mishandled
(D006)
Attention: Refer to “Danger notices” on page xv for safety information regarding moving the rack.
Professional movers/riggers may be required.
CAUTION:
Refer to “Rack safety” on page xix (R001, R002) for weight balance and loading safety
notices before moving loaded racks.
Perform the following steps to relocate the rack:
1.
Turn off all power to the rack and the devices installed.
2. Disconnect all power and all device cables.
3. Unbolt the rack from the floor or remove the stabilizers.
4. Raise all the leveling feet.
5. Unlock each caster wheel by loosening the screw on the caster.
6. Move the rack to the new position.
7. Reposition the rack. Go to “Step 1. Position the rack” on page 207.
Parts information
This chapter contains detailed drawings, FRU part numbers, and part descriptions for a IBM SAN rack.
For parts information specific to individual devices installed in the rack, see the installation and service
guides for those products.
Appendix A. SAN rack
221