IBM SAN256B-6, Installation, Service And User Manual

Page: 136 / 292

chassisSAN256B-6:admin> switchshow
switchName:
sw0
switchType: 165.0
switchState: Online
switchMode: Native
switchRole: Principal
switchDomain: 1
switchId: fffc01
switchWwn: 10:00:00:27:f7:f2:73:f6
zoning: OFF
switchBeacon: OFF
FC Router: OFF
HIF Mode: OFF
Allow XISL Use: OFF
LS Attributes:
[FID: 128, Base Switch: No, Default Switch: Yes,
Address Mode 0]
Index Slot Port Address Media Speed State Proto
============================================================
64 4 0 014000 id N32 Online FC F-Port 86:0d:00:11:0d:06:00:00
65 4 1 014100 id N32 Online FC F-Port 86:24:00:11:0d:07:00:00
66 4 2 014200 id N32 Online FC F-Port 86:0c:00:11:0d:05:00:00
67 4 3 014300 id N32 Online FC F-Port 86:25:00:11:0d:08:00:00
68 4 4 014400 id N32 Online FC F-Port 21:00:00:24:ff:90:55:30
69 4 5 014500 id N32 Online FC F-Port 21:00:00:24:ff:90:55:31
70 4 6 014600 id N32 Online FC F-Port 21:00:00:24:ff:90:55:9e
71 4 7 014700 id N32 Online FC F-Port 21:00:00:24:ff:90:55:9f
72 4 8 014800 id N32 Online FC E-Port 10:00:00:27:f8:f2:c5:b8
73 4 9 014900 id N32 Online FC E-Port 10:00:00:27:f8:f2:c6:b8 "ras010" (Trunk master)
74 4 10 014a00 id N32 Online FC E-Port 10:00:00:27:f8:f2:c7:b8 "ras010" (Trunk master)
75 4 11 014b00 id N32 Online FC E-Port 10:00:00:27:f8:f2:c8:b8 "ras010" (Trunk master)
76 4 12 014c00 -- N32 No_Module FC
77 4 13 014d00 -- N32 No_Module FC
78 4 14 014e00 -- N32 No_Module FC
79 4 15 014f00 -- N32 No_Module FC
80 4 16 015000 -- N32 No_Module FC
81 4 17 015100 -- N32 No_Module FC
82 4 18 015200 id N32 Online FC E-Port 10:00:50:eb:1a:f6:6c:67 "ras006" (Trunk master)
83 4 19 015300 id N32 Online FC E-Port 10:00:50:eb:1a:f6:6c:68 "ras006" (Trunk master)
84 4 20 015400 -- N32 No_Module FC
85 4 21 015500 -- N32 No_Module FC
86 4 22 015600 -- N32 No_Module FC
87 4 23 015700 -- N32 No_Module FC
88 4 24 015800 -- N32 No_Module FC
89 4 25 015900 -- N32 No_Module FC
---------------------------output truncated--------------------------------------------------------------------
supportSave
Use this command to collect RASLOG, TRACE, supportShow, core file, FFDC data and other support
information to a remote FTP location. On platforms that support a USB, the information can also be
stored on an attached USB device. SupportShow information is available on Active and Standby CPs.
Following is an example of supportSave output. This output assumes that the supportFtp was used to set
up FTP parameters (always recommended). In the following examples, the -c operand allows use of the
FTP, SCP, or SFTP parameters set by supportFtp . The -n operand turns off confirmation prompting.
chassis:admin> supportsave -n -c
Saving support information for switch:ras010, module:RAS...
..........................................................................
Saving support information for switch:ras010, module:FTRACE_START...
....
Saving support information for switch:ras010, module:SSHOW_SYS...
...............................................
108
SAN256B-6 Installation, Service, and User Guide