b.
Connect the SAS cable:
1)
Connect the mini-SAS connector of the SAS cable to the internal SAS connection port (C) on
the storage interposer until it snaps in place. See Figure 23 on page 24.
2)
Route the cable (A) in front of the memory riser cage, and along the channel in the side wall
until the SAS port connector is near the opening on the rear of the chassis.
3)
Align and guide the slot in the bracket of the SAS port connector (B) over the guide pin in
the chassis, then slide the SAS port connector into the opening on the rear of the chassis until
the tab on the bracket snaps in place.
Figure 22. Connecting the media device cables
Removing and replacing the 8231-E2B, 8231-E1C, 8231-E1D, 8231-E2C, 8231-E2D, or 8268-E1D system backplane
23
