v
The value for managedsystem is the new service processor's managed system name.
v
No value for --passwd is entered thereby allowing authentication.
v
The value for newpasswd is the newpassword value.
To change the SDMC access password, complete the following steps:
1)
Click the Resources tab, and then click Hosts.
2)
Select a server in the right pane.
3)
From the Actions menu, click Operations > Change Password.
4)
Provide the desired information and click OK.
42.
Recover partition data on the service processor.
Profile data stored in the managed server has been cleared or corrupted.
To recover profile data, using the HMC, complete the following steps:
a.
Expand the Systems Management folder in the navigation tree pane.
b.
Double-click the Servers folder.
c.
Use the check box to select a server, in the central panel.
d.
In the Configuration folder if you have the Manage Partition Data folder, select Restore.
To recover profile data, using the SDMC, complete the following steps:
a.
Click the Resources tab, and then click Hosts.
b.
Select a server in the right pane.
c.
From the Actions menu, click System Configuration > Manage Partition Data > Restore.
d.
Select the desired restore option and click OK.
43.
Update vital product data.
If your system is running IBM i and is not managed by the management consoles, you must update
the load source after replacing the system backplane. To update the load source without using the
management consoles, do the following steps:
a.
Insert the I_BASE_01 Licensed Internal Code optical media into the device that is defined for the
system and access it to perform an initial program load (IPL).
b.
On the control panel change the IPL source to D.
c.
On the control panel press the Power on button to perform an initial program load (IPL).
Note:
This IPL can take several minutes.
d.
After the Select a Language Group display is shown, press Enter to select the default language
feature 2924 (English).
Note:
To change the language feature, type the language feature that appears on the media that
contains the operating system, and then press Enter.
Confirm the language feature by pressing Enter.
e.
From the Install Licensed Internal Code display, select option 2 (Work with Dedicated Service
Tools (DST)) and press Enter.
Use the Dedicated Service Tools to make sure the disk units, including the load source, are
reporting correctly and that there are no errors that might prevent the IPL from disk. When all
errors have been resolved and the load source disk is reporting correctly, continue with the next
step.
f.
From the Work with dedicated service tools (DST) display, select option 2 (Work with disk units)
and press Enter.
g.
Select option 8 (Update system vital product data) to identify the location of the load source disk
unit. Press Enter. The Update System Vital Product Data display is shown.
h.
Press Enter to confirm that you want the vital product data to be written.
i.
Press F12 (Previous).
30
Power Systems: System backplane for the 8231-E2B, 8231-E1C, 8231-E1D, 8231-E2C, 8231-E2D, or 8268-E1D
