j.
Select Option 4 (Start a service tool).
k.
From the Work with dedicated service tools (DST) display, select option 4 (Operator panel
functions).
l.
From the Operator panel functions display, change the IPL source to 2 (B) and IPL mode to 2
(Normal).
m.
Press F8 (Restart) to set the IPL attributes and restart the system.
44.
Restore the boot list and Host Ethernet Adapter settings.
The boot list is not present on a new system backplane; therefore, it is necessary to create the boot
devices by booting into the system management services (SMS) menus. See Selecting boot options for
information on setting the boot device list.
After the operating system is booted, the bootlist command can be used to verify, or make additional
changes to, the list of boot devices for a system or partition.
To restore the Host Ethernet Adapter settings, see Configuring physical ports on a Host Ethernet
Adapter.
45.
Start the system or logical partition. See Starting the system or logical partition.
46.
Verify the repair. For more information, see Verifying a repair.
Removing and replacing the 8231-E2B, 8231-E1C, 8231-E1D, 8231-E2C, 8231-E2D, or 8268-E1D system backplane
31
