b.
Disconnect the SAS cable:
1)
Press the side tab (B) and pull out the SAS shroud from the external SAS connection port on
the disk drive backplane. See Figure 2 on page 8.
2)
Pull out the SAS cable (C) from the system.
3)
Press the latch for the SAS connection port (A) and then dislodge the SAS cable (C) out of the
system backplane.
Figure 1. Disconnecting the operator panel cable
Removing and replacing the 8231-E2B, 8231-E1C, 8231-E1D, 8231-E2C, 8231-E2D, or 8268-E1D system backplane
7
