35.
Go to step 26 on page 25.
36.
Restore service processor settings.
Change the password of the admin user ID when prompted by performing the following steps:
a.
In the navigation area of the ASMI, expand Login Profile.
b.
Select Change Password under Login Profile.
c.
Specify the required information, and click Continue.
As a security measure, you are required to enter your current user password in the Current
password for current user ID
field.
Note:
Passwords can be any combination of up to 64 alphanumeric characters. The default
password for the admin User ID is admin. After your initial login to the ASMI, the admin password
must be changed.
As a security measure, you are required to enter the password for your user ID in the Current
password for current user
field.
37.
Restore service processor settings.
Figure 25. Pin-hole switch on the operator information panel
28
Power Systems: System backplane for the 8231-E2B, 8231-E1C, 8231-E1D, 8231-E2C, 8231-E2D, or 8268-E1D
