IBM Deskstar Deskstar 3, User Manual

Page: 109 / 392

4. Press Scroll
↑
or Scroll
↓
until the printer displays
Coax Configuration
Printer Compatibility
5. Press Enter.
6. Press Scroll
↑
or Scroll
↓
until the printer displays
Printer Compatibility
Screen Buffer Size
7. Press Enter to display the current value.
8.
Press Scroll
↑
or Scroll
↓
until the desired value for screen buffer size is
displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
10. Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
Printer Compatibility 1 (Carriage Return at MPP + 1)
You can set the printer to automatically execute a carriage return at one position
past the current Maximum Print Position value. You can set this value to:
Standard (Default)
An automatic new line executes at MPP + 1, then a carriage return
executes. The next print position will be the first print position of the next
line.
Alternate
No automatic new line executes. The carriage return executes at MPP + 1.
The next print position will be the first print position of the current line.
Note: The printer performs a partial reset to put any change to this parameter
value into effect when you exit the Configuration Menu with Start or
Return
. Buffered data will be lost.
To change or check the carriage return at MPP + 1, follow these steps:
1. Press Menu.
2.
Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Coax Configuration
3. Press Enter.
4. Press Scroll
↑
or Scroll
↓
until the printer displays
Coax Configuration
Printer Compatibility
5.
Press Enter.
Chapter 8. Coax Configuration
99