IBM Deskstar Deskstar 3, User Manual

Page: 34 / 392

1. Before attaching the twinax cable, set the printer address. If your desired
printer address is 0, go to Step 2 on page 25. If your desired printer address is
not 0, see the following table for the valid values and follow Steps 1a through
1k on page 25 to change the value. If you do not know what to assign for the
printer address, check with your system operator.
If Desired
Address Is:
Set:
Shown when Setting
Printer Address:
0 000 Printer Address=0
1 001 Printer Address=1
2 002 Printer Address=2
3 003 Printer Address=3
4 004 Printer Address=4
5 005 Printer Address=5
6 006 Printer Address=6
To set the printer address, follow these steps:
a. Power on (|) the printer.
b. Wait until the message
IBM 4247
appears, all segments of the LCD on the
operator panel display are lighted, and the printer has stopped all motion.
The printer then displays:
DIAGNOSTICS IN PROGRESS
PLEASE WAIT
READY <A>
Twinax Front
and this error message is displayed:
015 COMMUNICATIONS CHECK
CHECK CABLE
c.
Press Menu.
d. Press Scroll
↑
or Scroll
↓
until the printer displays:
CONFIGURATION MENU
Twinax Configuration
e. Press Enter.
f. Press Scroll
↑
or Scroll
↓
until the printer displays:
Twinax Configuration
Printer Address
g. Press Enter. The printer displays:
Printer Address
* 000
h. Press Scroll
↑
or Scroll
↓
until the printer displays the desired address.
24
4247 Model 003 User’s Guide