IBM Deskstar Deskstar 3, User Manual

Page: 70 / 392

Table 6. Coaxial Configuration (continued)
Parameters Values Default
Printer Compatibility 6
(Form Feed Command Position) Standard
Alternate Standard
Printer Compatibility 7
(Automatic Function after end of
Print Buffer) Standard
Alternate Standard
Printer Compatibility 8
(Automatic Function after OILC Job) Standard
Alternate Standard
Printer Compatibility 9
(Suppress Timeout of No Data
Loss Intervention Required) Standard
Alternate Standard
Printer Compatibility
Early Print Complete Disabled
Enabled Disabled
Printer Compatibility 12
(Automatic Function before Start
of OILC Job) Standard
Alternate Standard
Printer Compatibility
FF Suppression Disabled
Enabled Disabled
Printer Compatibility
Programmed Symbols Disabled
Enabled Disabled
Translate Table Default
Downloaded Default
Bar Code Mode High
Low
Computer Selected High
Graphics Mode High
Low
Computer Selected High
Alarm Control Enabled
Disabled Enabled
Override Host
Paper Source
(active for SCS data stream) Disabled
Enabled Disabled
Programmed Symbols
Plane Selection 3 1 Triple
6 Single 3 1 Triple
Programmed Symbols
Full Page on Skip Suppress Standard
Alternate Standard
Programmed Symbols
PS Print Direction Unidirectional
Bidirectional Unidirectional
Parallel and Serial Configuration
Table 7 on page 61 lists the parameters available for the Parallel Configuration
Category. Parameters that can be overridden by the computer are noted with a
dagger (†). Refer to Chapter 9, “Parallel and Serial Configuration” for detailed
information on setting these parameters.
60
4247 Model 003 User’s Guide