IBM Deskstar Deskstar 3, User Manual

Page: 146 / 392

5. Press Enter to display the current value.
6.
Press Scroll
↑
or Scroll
↓
until the desired value for Input Buffer Size is
displayed.
7. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
8. Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
Select-In Signal
This parameter is valid in Epson-FX emulation mode only and instructs the printer
how to handle Select-In Signals. You can set the Select-In Signal to:
Enabled (Default)
The Select-In Signal is ignored and treated as always on.
Disabled
The printer checks the Select-In Signal from the host.
To change or check the Select-In Signal:
1. Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Parallel Configuration
3. Press Enter.
4.
Press Scroll
↑
or Scroll
↓
until the printer displays
Parallel Configuration
Select-In Signal
5. Press Enter to display the current value.
6. Press Scroll
↑
or Scroll
↓
until the desired value for Select-In Signal is displayed.
7. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
8. Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
AutoFeed XT
This parameter is valid in Epson-FX emulation mode only and instructs the printer
whether the host will determine if an automatic line feed is performed after a
carriage return.
You can set this value to:
Disabled (Default)
The function is determined by the setting of Printer Compatibility 3 –
Automatic Line Feed on Carriage Return.
Enabled
The host determines whether an automatic line feed is performed after a
carriage return.
136
4247 Model 003 User’s Guide