IBM Deskstar Deskstar 3, User Manual

Page: 114 / 392

To change or check the form feed command position, follow these steps:
1.
Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Coax Configuration
3. Press Enter.
4. Press Scroll
↑
or Scroll
↓
until the printer displays
Coax Configuration
Printer Compatibility
5. Press Enter.
6.
Press Scroll
↑
or Scroll
↓
until the printer displays
Printer Compatibility
6 (FF position)
7. Press Enter to display the current value.
8. Press Scroll
↑
or Scroll
↓
until the desired value for form feed command
position is displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
10. Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
Printer Compatibility 7 (Automatic Function After End of Print Buffer)
You can set this value to:
Standard (Default)
The printer will automatically start a new line after the data in the print
buffer has printed, unless a New Line, Carriage Return, or Form Feed was
the last function executed.
Alternate
The printer will automatically execute a form feed after the data in the
print buffer has printed, unless a Form Feed command was the last
function executed.
Note: The printer performs a partial reset to put any change to this parameter
value into effect when you exit the Configuration Menu with Start or
Return
. Buffered data will be lost.
To change or check the automatic function after end of print buffer value, follow
these steps:
1. Press Menu.
2.
Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Coax Configuration
3. Press Enter.
104
4247 Model 003 User’s Guide