IBM 6400 Series, Setup Manual

Page: 96 / 316

96
Chapter 3
Factory Default Configuration Values
Poll Character 00 Hex
One Char Enquiry Disable
Serial Hotport
Trickle Time 1/4 Sec
Timeout 10 Sec.
Report Status Disable
Framing Errors Enable
EMULATION CONFIGURATION
Active Graphic Emulation
IGP
IGP Emulation
Define CR Code CR = CR
Define LF Code LF = LF
Auto LF Disable
Select SFCC 7E
PI Slew Range 16
CR Edit Disable
Select Font 0
Slash 0 Disable
Lines Per Inch 6 Lines Per Inch
Mono/Dual Case Dual Case
Skip Command Prefix Enable
Power on IGP Enable
Ext Execute Copy Disable
UPC Descenders Enable
Compressed CPI Disable
Ignore Character
Ignore Mode Disable
Select Character 0
IGP100 Compatibility None
Expanded Font Block
Optimized Ratio Disable
ASCII Printer Emulation P-Series Emulation
Printer Emulation Configurations
Proprinter III XL Emulation
Print Language 0437 PC Character Set
Alternate Character Set PC Character Set 1
Define CR Code
CR = CR
Auto LF Enable
Define LF Code LF = LF
FF Valid at TOF Enable
20 CPI Condensed Enable
Epson Emulation
Character Sets Epson Set
Epson Print Language ASCII (USA)
Define CR Code CR = CR
Auto LF Enable
Define LF Code LF = LF