IBM 6400 Series, Setup Manual

Page: 177 / 316

IGP Configuration Menu
177
Select Font
This parameter allows you to select a font for the IGP feature. Valid selections
are 0 to 33. The following predefined values are available:
0 U.S. ASCII (the default)
1 German
2 Swedish
3 Danish
4 Norwegian
5 Finnish
6 English
7 Dutch
8 French
9 Spanish
10 Italian
11 Turkish
32 0858 PC Euro Multilingual
13 0923 Latin 9 8859-15
Values 14-23 are undefined and will default to 0. You can set values 24-31 to
specific fonts; refer to the USET command.
Slash 0
This option allows you to select is zeros will print with or without a slash (Ø).
•
Disable . (the default.) Prints zeros without a slash (0).
•
Enable . Prints zeros with a slash (Ø) to distinguish zeros from the
alphabetical capital “O.”
Lines Per Inch
This is the number of lines to be printed per inch. For example, at 6 lpi there is
1/6-inch from the top of one print line to the top of the next print line. The
following number of lines per inch may be selected:
•
6 (the default.)
•
8
•
9
•
10
Mono/Dual Case
This parameter enables the printer to print text in all uppercase when using
the ALPHA command.
•
Dual Case . (the default.) The printer will print text in upper- and
lowercase.
•
Mono Case . The printer will print text in uppercase only.