IBM 6400 Series, Setup Manual

Page: 179 / 316

IGP Configuration Menu
179
Ignore Character
Ignore Mode
This parameter instructs the IGP to ignore the character selected under the
Select Character menu.
•
Disable . (the default.) The IGP does not ignore any characters.
•
Enable . The IGP ignores the characters selected under the Selected
Character menu.
Select Character
This instructs the IGP which character to ignore from the host. Valid
selections are from 0-255. The default is 0.
IGP100 Compatibility
This option allows backward compatibility with older Printronix printer models.
If you want your new printer to emulate an older model, select from the
following options:
•
None . (the default)
•
MVP . Older printer model.
•
L150 . Older printer model.
•
P3000 . Older printer model.
•
P6000 . Older printer model.
•
P9000 . Older printer model.
Expanded Font
This option defines the type of expanded character the IGP/PGL will select.
The following choices are:
•
Block: The default. These are block characters compatible with the IGP-
X00 printers.
•
Alt Block 1: This is a customized block character set that is only
available for the non-overlay multinational group of character sets.
•
Scalable: These expanded characters have rounded edges.
Optimized Ratio
This option selects different bar code ratios for certain bar codes including
Code 39 and interleaved 2 of 5. It is included for compatibility with IGP-X00
printers.
•
Disable . The default. Use standard bar code ratios.
•
Enable . Select the alternate bar code ratios.