IBM 6400 Series, Setup Manual

Page: 272 / 316

272
Appendix D
Attaching Printer to an AS/400 Host System
Attaching Printer to Remote Control Unit with Twinax
Interface
AS/400’s auto configuration program does not support remote attached
printers. You must manually configure this printer as a remote printer attached
to a 5294, 5394, or 5494 Remote Control Unit. Use the following parameters
when configuring this printer as a remote printer on AS/400:
NOTE: AFP *Yes can be specified if the level of OS/400 supports the printer
as an AFP printer and PSF/400 is installed.
Parameter
Description
Parameter Parameter Setting
Device description DEVD Workstation printer name
Device class DEVCLS *RMT
Device type TYPE *IPDS (When printer is set to 4234-12 mode.)
Device type TYPE 4234 (When printer is set to 4234-2 mode.)
Device model MODEL 0000 (00 if IPDS (4234-12) and 02 if SCS (4234-2))
Type can be set to 6408 or 6412.
CTA for 6408 or 6412 model.
Advanced Function AFP *NO (See Note)
Location Address LOCADR xx
Online at IPL ONLINE *YES
Attached controller CTL Remote controller name
Font identifier FONT yyy (Default font identifier)
Form feed FORMFEED * Cont