IBM 6400 Series, Setup Manual

Page: 100 / 316

100
Chapter 3
Changing Parameters
5. PRINTER CONTROL
INTERFACE SELECTION Moves into the PRINTER
CONTROL menu.
6. PRINTER CONTROL
PRINT DIRECTION Moves to the PRINT
DIRECTION parameter.
7. PRINT DIRECTION
BIDIRECTIONAL* Move into the PRINT
DIRECTION menu. The asterisk
(*) shows that this is the active
value.
8. PRINT DIRECTION
UNIDIRECTIONAL Moves to the next available
option, the UNIDIRECTIONAL
option.
9. PRINT DIRECTION
UNIDIRECTIONAL* Selects the displayed value. An
asterisk (*) appears indicating
that this choice is now the active
value.
10. Continue this pattern to make all of the changes, using the information in this chapter.
11. To save changes so that they will remain when the printer is reset or powered back on, see
“” on page 101. If you want to use these values without saving, continue to the next step.
12. NOT READY Returns the printer to the NOT
READY mode.
13. OPERATOR MENU
LOCKED Locks Program mode and the
Operator Menu.
14. READY Places the printer in READY
mode, prepared for normal
operation.
Step Key LCD Results Notes
Enter
Scroll
↑
UNTIL
Enter
Scroll
↑
Enter
Stop
Scroll
↑
Scroll
↓
+
Stop