IBM 6400 Series, Setup Manual

Page: 246 / 316

246
Chapter 6
Fault Messages
OPERATOR MENU
<first menu item>
N/A Non–error status
message. No action necessary.
OPERATOR MENU
LOCKED N/A Non–error status
message. No action necessary.
OPERATOR MENU
UNLOCKED N/A Non–error status
message. No action necessary.
PA1 SELECTED N/A Attach status message. No action necessary.
PA2 SELECTED N/A Attach status message. No action necessary.
P05 DIAGNOSTIC TEST
PASSED N/A Non–error status
message. No action necessary.
P17 SECURITY VIOLATION No Security code of PAL on
controller board does not
match code of firmware
on the controller board. Contact your IBM service
representative.
PLEASE WAIT...
RESET IN PROGRESS
N/A Printer reset in progress. No action necessary.
READY N/A Printer state message:
printer is online and in
communication with
host. No action necessary.
RIBBON INK OUT
CHANGE RIBBON
Yes RibbonMinder has
determined that the
ribbon is out of ink. Replace the ribbon and
verify ribbon life is reset to
100%.
SERVICE MENU
<first service test>
N/A Non–error status
message. No action necessary.
TESTING HARDWARE
PLEASE WAIT
N/A Status message when
printer runs self–tests
and initialization
routines. No action necessary.
TOP OF FORM SET N/A Non–error status
message. No action necessary.
Table 11: Fault Messages
Fault Message
Operator
Correctable?
Explanation Solution