IBM 6400 Series, Setup Manual

Page: 42 / 316

42
Chapter 2
Remove Shipping Restraints (Cabinet Model)
6. Remove the envelope that contains the sample configuration printout.
7. Store this in the pouch that is attached to the left interior side of the
cabinet.
Remove The Hammer Bank Protective Foam
Figure 8. Removing the Hammer Bank Protective Foam - 6400 Series Models
1. Slide the paper supports outward as far as they will go.
2. Lift the hammer bank protective foam and remove it from between the
ribbon mask and the platen.
3. Rotate the forms thickness lever downward to position “A.”
Hammer Bank
Protective Foam
Paper Supports (2)
Forms Thickness
Lever