IBM 6400 Series, Setup Manual

Page: 277 / 316

6400-LU1-SCS-Remote SNA 3174 Control Unit
277
Step 3 - JES2 Definition
This definition is not required if you are using VPS and using U1 - U9999 as
the printer ID.
RMT1
LUTYPE1,BUFSIZE=3840,LINE=1,NUMRD=0,NUMPR=1,NOCOMP,NOCM
PCT,
SETUPHDR,CONSOLE (SETUPHDR=PDIR JES2 V3)
R1.PR1
CLASS=A,NOSEP,PRWIDTH=132,NOFCBLOD,WS=(W,R,Q,PMD,LIM,F,T/
C,P),
CKPTPAGE=30
DESTID NAME=P6400,DEST=R1
Step 4 - Define to CICS or another application program
An application program must provide the SCS commands to control the
printer. CICS, VPS, and other applications support SCS as well as numerous
application programs, both customer written and vendor supplied. Refer to the
vendor documentation for defining an SCS printer to the program for its use. If
there is no specific information on the 6400 you may use the IBM 4234 for
reference.
Step 5 - Printer Settings
It is recommended that the following printer settings be changed from factory
default settings:
•
Printer Control => Interface Selection => Coax
•
Coax Interface => Format Control => Enable