IBM 6400 Series, Setup Manual

Page: 94 / 316

94
Chapter 3
Factory Default Configuration Values
Factory Default Configuration Values
The factory default values are permanently stored as a configuration. They
cannot be modified or erased. The parameters which display depend on
which interface and emulation is installed.
Configuration
Below is a representative factory default configuration. Your factory default
configuration will depend on the features installed in your printer.
POWER ON CURRENT CONFIGURATION - FACTORY CONFIGURATION
IBM Printer Configuration
File Part Number XXXXXXX Date XX-XXX-XXXX
Reference Number XXXXXX
DC
V2.04D XX-XXX-XX #XXXXXX
EC V2.01B XX-XXX-XX #XXXXXX
BOOT/CMX V1.05E XX-XXX-XX #XXXXXX
SHUTTLE TYPE 1500
FLASH 8 MB
DRAM 8 MB
SECURITY PAL XXXXXX-XXX
CONFIGURATION CODE FC06FF
PRINTER CONTROL
Interface Selection Parallel
Display Language English
Alarm Control Alarm Enabled
Print Direction Bidirectional
Hex Print Mode Disable
Power On State Ready
Paper Jam Detection Enable
Forms Speed Normal Speed
Set Platen at Bottom of Form Disable
Shuttle Timeout 5 Seconds
Energy Saver Timer 15 Minutes
OCR Font Density 120 Dots Per Inch
Eject/Restore Standard
PTR Setup Option
Setup Parse Disable
Setup SFCC 21h
File System
Overwrite Files Enable
View File List
93779.sf 177228 Bytes
Plugin.cdm 122066 Bytes
HQ3UPDT.cdm 53480 Bytes
Pluginfp.cdm 206161 Bytes
IF.fnt 339 Bytes
HQ3.fnt 444 Bytes
UIF.ss 21646 Bytes