IBM 6400 Series, Setup Manual

Page: 283 / 316

Non-SNA Attachment
283
Non-SNA Attachment
Sample exec file for attaching to a LOCAL 3174 NON SNA port
/* Signal JUST_VM to avoid redefining printer */
’DISABLE XXXX’
’ATT 1601 TO RSCSCOAX AS XXXX’
’SMSG RSCSCOAX STOP PRTXXXX’
’SMSG RSCSCOAX DELET PRTXXXX’
’SMSG RSCSCOAX DEFINE PRTXXXX LINE XXXX TYPE 3270P PARM
BUF=2560’
Use as approriate:
/* ’SMSG RSCSCOAX DEFINE PRTXXXX LINE 1601 TYPE 3270P PARM
COMP=NO’ */
/* ’SMSG RSCSCOAX DEFINE PRTXXXX PARM VFC=YES SEP=YES’ */
/* ’SMSG RSCSCOAX DEFINE PRTXXXX PARM VFC=YES SEP=NO’ */
/* ’SMSG RSCSCOAX DEFINE PRTXXXX PARM VFC=NO SEP=NO TR=ASISCC’
*/
/* ’SMSG RSCSCOAX DEFINE PRTXXXX PARM VFC=NO SEP=NO TR=TEXT
FEAT=AT’ */
/* ’SMSG RSCSCOAX DEFINE PRTXXXX PARM VFC=NO SEP=NO ’ */
’SMSG RSCSCOAX DEFINE PRTXXXX PARM VFC=NO SEP=NO’
’SMSG RSCSCOAX START PRTXXXX CLASS * QUEUE FIFO FORM *’
JUST_VM:
’CP SPOOL PRINT TO RSCSCOAX’
’CP TAG DEV PRT TO PRTXXXX SYSTEM 1’
’CP TA DE PRT PRTXXXX SYSTEM 1’
Physical and Logical Unit Types
This section describes some of the Physical Unit (PU) types and Logical Unit
(LU) types that you are likely to use when configuring this printer on your host
system. Generally, the PU defines the type of communications relationship
that the HOST VTAM has with a communications controller such as a 3174
control unit or a controller inside a printer such as a 3820 or 3935.
Alternatively, it can describe the relationship that one host VTAM has to
another host VTAM or equivalent, such as an AS/400.
Physical Unit (PU) types and examples
Physical Units, as implied, are part of the physical hardware such as a control
unit (3174). VTAM and NCP use various PU types in conjunction with the
Logical Unit (LU) types to define the device and logical session to be
established with an SNA network.
PU type 2
The PU type 2 is the physical unit type that is required for an LU type 0, type
1, or type 3 (see LU type description following). Examples of PU type 2 are
3174 control units.