IBM 3746-900, Installation And Maintenance Manual

Page: 61 / 264

**********************************************************************
G23SIDES GROUP DIAL=YES,LNCTL=SDLC,TYPE=NCP,REPLYTO=3,XID=YES
*
K23C0004 LINE ADDRESS=(0004,FULL),DUPLEX=FULL,RING=YES,NEWSYNC=NO,
X
V25BIS=(YES,DLSDLC),AUTO=YES,PAUSE=0.5,TRANSFR=71, X
NRZI=YES,CLOCKNG=EXT,RETRIES=(3,3,3),CALL=IN
P23C0004 PU PUTYPE=2,ISTATUS=ACTIVE
**********************************************************************
Figure 1-37. Example of NCP Generation for an SDLC Link to NetView
- Define a Group, Line and PU for the Physical line.
.
.
*---------------------------------------------------------------------* FFA30320
* TIC3 BNN/INN:
PORT 2080 - PHYSICAL * FFA30330
*---------------------------------------------------------------------* FFA30340
G502080 GROUP ECLTYPE=(PHYSICAL,ANY),
X
ADAPTER=TIC3
K50C2080 LINE ADDRESS=(2080,FULL),PORTADD=0,
LOCADD=400000502080
X
MAXTSL=16732,LSPRI=PU,PUTYPE=1,ANS=CONTINUE, X
TRSPEED=16,TRANSFR=254
S50C2080 PU ADDR=01, X
INNPORT=YES
.
.
- Define a Group, Line and PU for the Logical line.
.
.
*********************************************************************** FFA33180
*
* FFA33190
* TIC3 BNN : PORT 2080 - LOGICAL Connection to Service Processor * FFA33200
* * FFA33210
*********************************************************************** FFA33230
L50G2080 GROUP DIAL=YES,LNCTL=SDLC,TYPE=NCP,ECLTYPE=(LOGICAL,PER),
X
CALL=INOUT,PHYSRSC=S50C2080, X
LINEAUT=YES, X
MAXPU=1, X
NPACOLL=NO, X
PUTYPE=2, X
RETRIES=(6,0,0,6)
R50A0001 LINE
Z50A0001 PU
.
.
Figure 1-38. Example of NCP Generation for a LAN Link to NetView
Chapter 1. Installing and Setting Up Your Service Processor
1-41