IBM 3746-900, Installation And Maintenance Manual

Page: 28 / 264

Service Processor Installation Tasks
Note: If you are not familiar with the Service Processor operations, refer to Service Processor and
Network Node Processor Service User , SY33-2127, and then return here.
TASK DESCRIPTION GO TO
1 Installation preparation “Step 1: Preparing Your Installation” .
2 Install the System Unit, Display, and Keyboard “Step 2: Installing the System Unit, Display,
and Keyboard” on page 1-9
.
3 Install the 8228 and connect to the Service
Processor “Step 3: Installing the Service Processor
Access Unit (8228)” on page 1-18
.
4 Install and connect the RSF modem to the Service
Processor “Step 4: Installing and Connecting the RSF
Modem to the Service Processor” on
page 1-21
.
5 Customize your &SO. according to the customer’s
options “Step 7: Customizing Your Service Processor”
on page 1-33
.
Step 1: Preparing Your Installation
Obtain from the customer the following parameter worksheets:
1. "Parameter definitions for RSF"
2. "NetView path parameters"
3. "Service Processor integration"
4. "Service Processor parameters for DCAF"
5. "NCP dump transfer" (not applicable for 3746-950)
These parameter worksheets are part of the 3745 Communication Controller
Models A and 3746 Models 900 and 950: Planning Guide , GA33-0457 Appendix A
and must be filled in by the customer. A copy of these parameter worksheets is
given at the end of this manual see Appendix C, “Parameter Worksheets.”
1-8
3745-XXA 1-8 3746-9X0: 6578 SPIM