IBM 3746-900, Installation And Maintenance Manual

Page: 60 / 264

18. Then click Next>> , then go to step 19 on page 1-42 (if you selected in step
10 on page 1-35 to customize a 3270 session).
When defining an SDLC link to NetView through an Advanced Peer-to-Peer
Networking
R (APPN R ) network, the CCM parameters must be set as follows:
a. DLC Parameters 1/3:
Transmit Receive Capability: Full-duplex
Interface: V.25bis
Prot Type: Switched
Clocking: External
Link Station Role: Negotiable
b. DLC Parameters 2/3:
Transmit NRZI: Yes
Echo Defeat: No
Monitor Ring: Yes
Answer Tone: Yes l
Interface Gap: No
c. DLC Parameters 3/3: keep the default values
d. APPN Station:
PU Type: 2.1
Destination Address: 1C
For DLC and APPN parameters: keep the default values
When defining a link to NetView through an SNA network , for examples of the
NCP generation, see:
Figure 1-38 on page 1-41 for a LAN link, the LAN destination address
must be equal to the
LOCADD
(recorded in NCP gen).
Figure 1-37 on page 1-41 for an SDLC link, the SDLC link is defined for
the alternate stream path to NetView.
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*
*
* MAJNODE FOR CONNECTION : MOSS-E <==> NETVIEW V2R3 *
* *
* *
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
NTVMOSSE VBUILD TYPE=SWNET,MAXGRP=1,MAXNO=1
*---------------------------------------------------------------------*
MOSSE
PU ADDR=04,PUTYPE=2,
NETID=SYSTST
,
CPNAME=MOSSNMVT
X
MAXPATH=8,MAXDATA=265,MAXOUT=1, X
DISCNT=NO,
Figure 1-36. Example of Switched Major Node Definition
1-40
3745-XXA 1-40 3746-9X0: 6578 SPIM