IBM 3746-900, Installation And Maintenance Manual

Page: 139 / 264

Diagnostic Error Code FRU to replace/action to take
071-00 X - XXX
071-01 X - XXX
071-02 X - XXX
Audio port error
1. Run Setup.
2. Flash the system.
3. System board
071-03 X - XXX
Audio port failure
1. Speakers
2. Microphone
3. Audio card, if installed
4. System board
071-04 X - XXX
Audio port failure
1. Run Setup.
2. Audio card, if installed
3. System board
071-195- XXX
Audio port Test aborted by user
1. Information
2. Restart the test, if you need to.
071-196- XXX
Audio port test halt, error threshold
exceeded
1. Press F3 to review the log file. See
“Viewing the Test Log” on
page 4-8.
2. Restart the test to reset the log file.
071-197- XXX
Audio port test warning
1. Make sure that the component that
is called out is enabled or
connected.
2. Rerun the test.
3. Component that is called out in
warning statement
4. Component under test
071-198- XXX
Audio port test aborted
1. If a component is called out, make
sure that it is enabled or
connected.
2. Flash the system and retest.
3. Go to “Undetermined Problems” on
page 3-22.
071-199- XXX
Audio port test failed, cause unknown
1. Go to “Undetermined Problems” on
page 3-22.
2. Flash the system and retest.
3. Replace component under function
test.
071-25 X - XXX
Audio port failure
1. Speakers
2. Audio card, if installed
3. System board
080-000- XXX
Game Port interface Test Passed
1. No action
080- XXX - XXX
Game Port interface Error
Remove the game port device and
retest the system.
080-195- XXX
Game Port interface Test aborted by user
1. Information
2. Restart the test, if you need to.
080-196- XXX
Game Port interface test halt, error
threshold exceeded
1. Press F3 to review the log file. See
“Viewing the Test Log” on
page 4-8.
2. Restart the test to reset the log file.
Chapter 4. Service Processor Diagnostics and Test Information
4-21