IBM 3746-900, Installation And Maintenance Manual

Page: 66 / 264

24. Select the type of DCAF links that you are going to define and modify the LU
name according to the customer specifications.
Notes:
a. We recommend using four letters to identify the MOSS-E machine to DCAF
connections. These names should be unique in your network; see the
following worksheets:
“For SNA-Attached Consoles” on page C-4
“For APPN/HPR-Attached Consoles” on page C-4
“For LAN-Attached Consoles” on page C-4
“For Modem-Attached Consoles” on page C-4
b. To specify the destination address, see Figure 1-43 on page 1-45 and
according to the NetView path definition, set this address as follows:
If the alert path to NetView is not defined or through SNA :
– The DCAF SNA can be set for path: 1, 2, or 3
– The DCAF APPN can be set for path: 3
If the alert path to NetView is defined through APPN:
– The DCAF SNA can be set for path 1, 2, or 3 with a RSAP different
than the TIC3 RSAP (see Figure 1-35 on page 1-39)
– The DCAF APPN can be set for path 3 with the same RSAP define
for the NetView link (see Figure 1-35 on page 1-39).
25. Then click Next>> , and go to step 28 on page 1-48.
Figure 1-44. DCAF Customization
1-46
3745-XXA 1-46 3746-9X0: 6578 SPIM