IBM 3746-900, Installation And Maintenance Manual

Page: 34 / 264

Figure 1-9. Installing the Keyboard
16. Obtain a table or a desk large enough to receive the Service Processor, the
display, the keyboard, and the modem, and go to step 17.
| 17. Connect the cables to the 6578 as follows (see Figure 1-10 on page 1-15):
a. Connect the keyboard cable
A
to the connector at the rear of the Service
Processor.
b. Connect the mouse cable
B
to the connector at the rear of the Service
Processor.
Note: If you are installing the keyboard and the mouse outside of the
controller expansion, use the keyboard extender cable PN 10K8632
G
and the mouse extender cable PN 10K8633
H
(see Figure 1-11 on
page 1-15).
c. Connect the Service Processor power cord
C
.
d. Connect the token-ring cable
D
(PN 6339098) to the Service Processor
connector.
e. Connect the display signal cable
F
to the Service Processor connector.
Note: If you are installing the display outside of the controller expansion,
use the extender cable PN 59G1270 (see Figure 1-11 on page 1-15,
reference
J
).
f. After you secure all these connections, plug the power cords into
properly grounded electrical outlets.
1-14
3745-XXA 1-14 3746-9X0: 6578 SPIM