IBM 3746-900, Installation And Maintenance Manual

Page: 59 / 264

17. See Figure 1-35, then enter the following information:
a. Generate (or not) the alerts to NetView (see the parameter worksheet
“Generate MOSS-E Alerts” on page C-4) .
b. Specify the NetView link through a SNA or APPN network.
c. Select the number of links (1 or 2).
d. If it is one link, specify the type (LAN or SDLC).
e. Enter the machine type, model, and serial number.
f. Enter the Network ID, and local node name.
Note: The Network ID and the Local node name parameters must match
the values recorded in the Switched Major node definition:
Network ID:
NETID
Local node name:
CPNAME
<===> Local PU Name
(See Figure 1-36 on page 1-40 to see one example of switched major
node definition)
g. If you are defining a 3270 session, enter the locally administrated address
(LAA).
Note: The LAN destination address is the TIC2 (3745) or TIC3 (3746-900)
address through which you will access NetView. The TIC3 address can
also be used for a DCAF link (SNA-attached console only).
h. Enter the TIC3 RSAP value.
i. If one SDLC link or two links (the alternate path is necessarily SDLC),
specify the SDLC link telephone number.
Figure 1-35. NetView Link/Reporting Customization
Chapter 1. Installing and Setting Up Your Service Processor
1-39