![background image](http://html1.mh-extra.com/html/ibm/3454-fce/3454-fce_customer-install-manual_3327826046.webp)
© Copyright IBM Corporation 2020. Customer Install Guide, PDU
46
Configuring the PDU via serial (COM)
port
COM Port setup
The IP address on the PDU must be configured before communication can take place.
Set the IP address using the following steps.
Once the serial cable has been connected per the earlier procedure start a serial (COM)
session using a program such as Putty. The complete list of port settings for a serial
(COM) connection are as follows:
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Programs such as PuTTY only need a subset of the port settings. See Figure 20.
Figure 20 PuTTY Serial Session Settings
Summary of Contents for 3454-FCE
Page 6: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 6 Safety...
Page 52: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 52 Figure 29 EPO Setup...
Page 67: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 67 Regulatory and Compliance...
Page 74: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 74...