![background image](http://html1.mh-extra.com/html/ibm/3454-fce/3454-fce_customer-install-manual_3327826036.webp)
© Copyright IBM Corporation 2020. Customer Install Guide, PDU
36
10. If the PDU was provided with a detached power cord, connect the power cord
now.
Attention: You must ensure that the main input power is disconnected from the
power source (wall) before you connect or disconnect the input power cord from
the PDU model.
Disengage the PDU circuit breakers by pulling the six PDU circuit pins away from
the PDU chassis (receptacle side, Figure 13) then connect the power cord to the
PDU
Align the connector on the power cord (A) that was provided with the PDU with
the connector on the front of the unit (A), turning as necessary for key alignment.
Then, turn the twist-lock (B) on the connector clockwise until it locks into place.
Figure 13. Disengaging the circuit breakers and aligning the connector on the
power cord with the PDU.
(L001)
Summary of Contents for 3454-FCE
Page 6: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 6 Safety...
Page 52: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 52 Figure 29 EPO Setup...
Page 67: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 67 Regulatory and Compliance...
Page 74: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 74...