IBM 3454-FCE, Customer Install Manual

Page: 49 / 75

© Copyright IBM Corporation 2020. Customer Install Guide, PDU 49
default network settings, an IP address, Gateway IP address, and Subnet Mask can be
entered in the PDU. Press 9 [enter] and then 2 [enter] to disable DHCP and enter the
static network parameters. See 25.
Figure 25 - Setup Network Information
Receptacle configuration
PDU circuit breakers (shown to the right)
must be fully engaged (pressed in) before
configuring the outlets.
The PDU location and receptacle information can be changed for the PDU. Press 3
[enter] to define all the parameters shown in Figure 26. The default values are
displayed in parenthesis. To change a field, type the input on the computer keyboard
and press Enter. To keep the default value, press Enter. If the PDU Name and PDU
description are changed, the PDU Information menu will show them.