© Copyright IBM Corporation 2020. Customer Install Guide, PDU
32
Before you begin
Tip: Removing the rack doors and side panels might make installing the PDU easier.
About this task
To install the PDU model in a single EIA horizontal mounting space in the rack,
complete the following steps:
Procedure
1. Read the
Rack safety notices
, Pub # G229-9054 included with the unit.
2. Attach the brackets (A) to the PDU with two M3x5 screws (B) per bracket. Use
screws that were provided with the rack mounting kit. Ref Figure 9.
Figure 9. Aligning the vertical-mounting brackets to the front of the PDU. (PDU picture
for reference only, receptacle style may vary)
3. To install the PDU adjustable mounting rails (Figure 10), complete the following
tasks:
a. Assemble the adjustable mounting rail by using the three screws that are
included with each side of the mounting kit.
b. Attach the adjustable mounting rails to each side of the PDU chassis by
using the six screws that are included with the mounting kit.
Summary of Contents for 3454-FCE
Page 6: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 6 Safety...
Page 52: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 52 Figure 29 EPO Setup...
Page 67: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 67 Regulatory and Compliance...
Page 74: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 74...